隨著人造板等材料在家具及裝飾行業的應用越來越廣泛，家具及裝飾業為適合人們回歸自然的選擇，對實木封邊帶、實木包覆材料及木皮的需求量也越來越大。因此，我公司最新開發出實木封邊帶、實木包覆材料、連續接長木皮生產線成套設備。該設備主要用于將干燥后的刨切薄木由短接長，其接口形態為不平衡指形齒，接長后的單板長度可達200-300米以上，接長后的單板經打卷機自動打成盤狀。接好后的單板再經托底機將無紡布與其粘貼在一起。之后，再經單板帶砂光機進行定厚砂光、拋光。砂光后的單板再經單板分切機分切成需要的寬度，并自動形成盤狀的成品封邊帶或包覆材料及接長木皮。
　　With increasingly extensive application of wood-based panels and other materials in furniture and decoration industries, the furniture and decoration


　　industries have an increasingly great command for solid wood edgeband, solid wood coating material and wood veneer, which is applicable to the selection of returning to the nature. Therefore, our company has developed a complete set of productionline equipment for solid wood edgeband, solid wood coating material and continuous lengthening ofveneer wood. The equipment is mainly used to lengthen the sliced veneer after drying and the interface form is an imbalanced finger-type gear. The length of the lengthened single panel can reach above200 to 300 meters and the lengthened single panel is automatically made into a disc through a winding machine. The single panel is attached with non-woven fabrics through a backing machine after lengthening. Afterwards, the single panel is sanded through fixing thickness and polished by a sandingmachine. The sanded single panel is cut into the required width through a single-panelcutting machine and is automatically made into disc-type edgeband for finished goods or coating material and lengthened wood veneer.